Product Description
PRESS TOOL 3850038
Face the open end of a new gimbal housing seal toward the installer,
Volvo Penta P/N 3850038, and place it on the projecting nose of
the tool. Lightly coat the metal case with Volvo Penta Gasket Sealing
Compound.
2. Screw the installer onto the Drive Handle, Volvo Penta P/N 3850609.
Drive the seal into the housing until it seats. Coat the seal lip with
Volvo Penta Grease P/N 828250.
3. (SX-M Only) To ensure adequate lubrication of the gimbal bearing, it must be
correctly positioned prior to installation. Rotate the outer band until
its slot aligns with the lubrication hole. Scribe a reference mark at
this point on the bearing case.
